VSKY20401608 www.vishay.com vishay semiconductors rev. 1.2, 19-jan-17 1 document number: 85892 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 schottky rectifier surface mount flipky ? gen 2 mechanical data case: clp1608-2l int. construction: single features ? schottky diode for high-speed switching ? very low dimensions - 1.6 mm x 0.8 mm x 0.31 mm ? 2.0 a forward current ? low forward voltage drop (typ. 510 mv at 2.0 a) ? low reverse current (< 18 a at 10 v) ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 ? ? ? ? ? mm yy xxx parts table part ordering code internal construction package name type code weight taped units per reel (8 mm tape on 7" reel) minimum order quantity VSKY20401608 VSKY20401608-g4-08 single diode clp1608-2l 104 0.840 mg 5000 5000 absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit maximum repetitive pe ak reverse voltage v rrm 40 v maximum average forward rectified current v f = 0.5 v, r th = 100 k/w i f(av) 2a peak forward surge current 8.3 ms single half sine-wave i fsm 28 a power di ssipation on fr-4 board 50 mm x 50 mm 35 m cu single sided p tot 1000 mw thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit thermal resistance junction to ambient air on fr-4 board 50 mm x 50 mm 35 m cu single sided r thja 100 k/w maximum operating junction temperature t j 125 c storage temperature range t stg -65 to +150 c electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol typ. max. unit leakage current v r = 10 v i r 18 a v r = 40 v i r 150 a forward voltage i f = 100 ma v f 0.300 0.350 v i f = 1 a v f 0.425 0.470 v i f = 2 a v f 0.510 0.580 v diode capacitance v r = 0 v, f = 1 mhz c d 340 pf
VSKY20401608 www.vishay.com vishay semiconductors rev. 1.2, 19-jan-17 2 document number: 85892 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25c unless otherwise noted) fig. 1 - typical forward current vs. forward voltage at various temperatures fig. 2 - typical reverse current vs. reverse voltage at various temperatures fig. 3 - typical capacitance vs. reverse voltage 0.1 1 10 100 1000 0 0.1 0.2 0.3 0.4 0.5 0.6 i f - forward current (ma) v f - forward voltage (v) 22792 25 c 50 c 75 c 100 c t j = 125 c 1 10 100 1000 10 000 100 000 0 5 10 15 20 25 30 35 40 i r - rever s e current (a) v r - rever s e voltage (v) 22793 t j = 125 c 100 c 75 c 50 c 25 c 0 50 100 150 200 250 300 350 400 0 5 10 15 20 25 30 35 40 c d - typical ca pacitance (pf) v r - rever s e voltage (v) 22794
VSKY20401608 www.vishay.com vishay semiconductors rev. 1.2, 19-jan-17 3 document number: 85892 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: clp1608-2l footprint and solder ing recommendation: ? please see application note: www.vishay.com/doc?85917 created - date: 10. feb. 2014 rev. 1 : date: 27. march 2015 document no.:s8-v-3906.04-033 (4) l3 l/2 l2 l k d a1 a e a 0.25 0.31 0.02 0.58 0.65 1.6 nom. 0.8 nom. 1.42 1.52 0.85 0.93 0.25 0.33 min. max. a1 b b dell2l3 mm 22739
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
